Davey Hurricane Turbo Swim Jet - Manual (Page 6)

6
MOUNTING OF PACKAGES 2, 3, 4
- Make sure the 12 screws of the flange are correctly fastened without using excessive force.
- Cut out the liner along the inside of the flange by using a cutter.
- Remove the protective shield attached to the Jet Body with three M5 screws length 10.
CONNECTING:
-Connect the small capillary tube to the back of the Control Button, and pass it under the air
intake pipe, then through the slit foreseen for this purpose on the Air Regulation Button.
-Now slide capillary tube through reinforced hose connected to Jet Body.
CAUTION: the far end of the air intake pipe must be placed above water level.
-Do not forget to place the blue tube filter at the far end of
the air intake pipe.
-Fix the air intake pipe to the wall of the premises using
hook provided.
FIXING JET FACE:
-Once all previous instructions have been
carried out, screw the Jet Face to the Jet
Body by using three fixation screws M5
length 30.