Audiovox NPC5000 User Manual
Page 21
Operation
21
English
Switching on / off
The Multimedia System is switched on or off together with the ignition.
If the system has not been switched to stand-by mode prior to it being switched off,
then a title screen will first appear. This is followed by information on use of the
system.
— Confirm this information by pressing the OK-button.
The system is started after several seconds and the various functions can be selected.
Volume control
— Press the buttons
+
or
-
on the remote control in order to change the volume
of the audible information (see also “SDVC” option in section ““Volume control”
function” on page 25).
You will hear “Louder” or “Softer” with the current volume setting.
ஊ
This setting affects both the volume of the external loudspeaker (if installed) and
also the loudspeaker installed in the external monitor.
A
A
A
A
Set the volume to such a level that you still can hear outside traffic and emergency
vehicles.
Audiovox_MS5000.book Seite 21 Donnerstag, 9. November 2000 3:41 15