Audiovox NPC5000 - Manual (Page 36)

Guidance
36
Audible messages
As soon as you have activated guidance, audible driving directions – in addition to
the symbols in the guidance screens – are provided.
You didn't hear the information?
— Press the REP-button on the remote control.
The last direction is repeated and / or updated driving directions are provided.
If the symbol l is displayed in the status line, the audible information is switched
off. You can switch the audible information back on either via the “System Settings”
menu or by pressing the
+ or - button on the remote control (for volume control).
The symbol l in the status line disappears.
Do you want to change the volume of the audible information?
— Press the + or - button on the remote control.
To check the selected setting is correct you will hear “Louder” and / or “Softer” at
the current volume.
Route Information (“Info” menu)
The “Info” menu is invoked by selecting the “Info” function in the function lists of
the guidance screens.
The following information / functions are available:
• Route selection Selection list for route criterion; see “Route Criteria” on
page 31. Setting can be changed (route is automatically
recalculated).
• Info on car pos. Invoke list of points of special interest in the vicinity of
the car location, see “Points of Interest”.
• Next via point Display of next via point in the list of via points.
Return to “Start Menu” with “Return”.
Automatic re-routing
If you do not follow the advice provided by the system and / or use another route
than that planned by the system, then the system automatically plans a new route.
Audiovox_MS5000.book Seite 36 Donnerstag, 9. November 2000 3:41 15