Elitegroup A990FXM-A Deluxe (V1.0) - Manual (Page 41)

37
Using BIOS
SATA Configuration
Use this item to show the mode of serial-ATA configuration options.
Serial-ATA Controller (Enabled)
This item allows you to enable or disable the onboard SATA controller.
SATA Mode (IDE Mode)
Use this item to select SATA mode.
SATA Port 1~6 (Not Present)
This motherboard supports six SATA channel and each channel allows one SATA
device to be installed. Use these items to configure each device on the SATA channel.
Press <Esc> to return to the Advanced Menu page.
SATA Configuration
Serial-ATA Controller [Enabled]
SATA Mode [IDE Mode]
PATA Controller [Enabled]
eSATA 6Gb/s Controller Mode [AHCI Mode]
SATA Port1 Not Present
SATA Port2 Not Present
SATA Port3 Not Present
SATA Port4 Not Present
SATA Port5 Not Present
SATA Port6 Not Present
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Version 2.10.1208. Copyright (C) 2010 American Megatrends, Inc.
Main Advanced Chipset M.I.B X Boot Security Save & Exit
+/- : Change Opt.
Enter : Select
F1:General Help
:Select Screen
:Select Item
F2:Previous Value
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Enabled/Disabled SATA
Contreller
eSATA 6Gb/s Controller Mode (AHCI Mode)
Use this item to select eSATA mode.
PATA Controller (Enabled)
Use this item to enable or disable the PATA device.