Elitegroup A990FXM-A Deluxe (V1.0) - Manual (Page 57)

53
AMD RAID Configuration
Setting Up a bootable RAID Array
This section explains how to configure a bootable AMD RAID array.
Setting Up the BIOS
Use the arrow keys to select Advanced menu (see Figure 1.1), then select
SATA Configuration and press Enter.
The Integrated Peripherals screen (or a screen similar to it) appears.
Figure 1.2 SATA Configuration Screen
Use the arrow keys to select the SATA Configuration (see Figure 1.2) and
globally set SATA Configuration to RAID.
Start your computer, then press Delete to enter the BIOS setup.
The BIOS CMOS Setup Utility screen appears.
Figure 1.1 BIOS CMOS Setup Utility Main Screen
1
2
3
Chapter 5
Setting Up AMD SB950 RAID Configuration
BIOS Information
System Date [ Mon 04 /18/2011]
System Time [05:44:29]
Choose the system default
language
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Version 2.10.1208. Copyright (C) 2010 American Megatrends, Inc.
Main Advanced Chipset M.I.B X Boot Security Save & Exit
F1:General Help
lk
:Select Item
Enter : Select
mn
:Select Screen
F2:Previous Value
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
+/- : Change Opt.
SATA Configuration
Serial-ATA Controller [Enabled]
SATA Mode [IDE Mode]
PATA Controller [Enabled]
eSATA 6Gb/s Controller Mode [AHCI Mode]
SATA Port1 Not Present
SATA Port2 Not Present
SATA Port3 Not Present
SATA Port4 Not Present
SATA Port5 Not Present
SATA Port6 Not Present
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Version 2.10.1208. Copyright (C) 2010 American Megatrends, Inc.
Main Advanced Chipset M.I.B X Boot Security Save & Exit
Enabled/Disabled SATA
Contreller
F1:General Help
lk
:Select Item
Enter : Select
mn
:Select Screen
F2:Previous Value
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
+/- : Change Opt.