Elitegroup A990FXM-A Deluxe (V1.0) - Manual (Page 48)

44
Using BIOS
Boot Configuration
Bootup Numlock State [On]
Quiet Boot [Enabled]
Set Boot Priority
1st Boot [CD/DVD]
2nd Boot [Hard Disk]
3rd Boot [USB Floppy]
4thBoot [USB CD/DVD]
5th Boot [USB Hard Disk]
6th Boot [USB KEY]
7th Boot [Network]
8th Boot [UEFI]
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Version 2.10.1208. Copyright (C) 2010 American Megatrends, Inc.
Main Advanced Chipset M.I.B X Boot Security Save & Exit
+/- : Change Opt.
Enter : Select
F1:General Help
:Select Screen
:Select Item
F2:Previous Value
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Select the keyboard Numlock
state
This page enables you to set the keyboard NumLock state and Boot device priority.
Boot Menu
Bootup NumLock State (On)
This item determines if the NumLock key is active or inactive at system start-up
time.
Quiet Boot (Enabled)
If enabled, BIOS will show a full screen logo at boot, if disabled, BIOS will set the
initial display mode to BIOS and show the diagnostic POST screen at boot.
1st/2nd/3rd/4th/5th/6th/7th/8th Boot (CD/DVD /Hard Disk /USB Floppy /USB
CD/DVD /USB Hard Disk /USB KEY /Network /UEFI)
Use these items to determine the device order the computer used to look for an
operating system to load at start-up time. The devices showed here will be different
depending on the exact devices installed on your motherboard.