Technology support, Ati crossfirex, Technology support chapter 6 – Elitegroup A990FXM-A Deluxe (V1.0) User Manual
Page 65: Requirements, Installing crossfirex, Graphics cards
61
ATI CrossFireX
TM
Technology Support
Chapter 6
ATI CrossFireX
TM
Technology Support
This motherboard supports the ATI CrossFireX
TM
Technology that allows you to
install multi-graphics processing units (GPU) graphics cards. Follow the installation
procedures in this section.
Requirements
1
Two or three identical CrossFireX
TM
ready graphic cards are needed for the
setup of 2-way / 3-way CrossFireX
TM
configuration.
2
You would need one or two CrossfireX
TM
bridge cable.
3
Make sure that your graphics card driver supports the ATI CrossFireX
TM
technology. Download the latest driver from the ATI website
(www.ati.com).
4
Make sure that your power supply unit (PSU) can provide at least the
minimum power required by your system.
Installing CrossFireX
TM
graphics cards
1. Insert the CrossFireX
TM
graphics cards into the PCIEX16 slots. Make sure that the
card is properly seated on the slot.
A. For 2-way configuration, install two graphic cards on PCIEX16_1 & PCIEX16_2
and connect them with the CrossFire
TM
Bridge.
* For reference only