AT&T 1187 - Manual (Page 10)

8
Getting Started
Wall mounting
The telephone base can be installed on any standard wall-phone outlet as shown below.
Choose a location away from electronic equipment, such as personal computers,
television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture.
Press and slide down firmly so base is
held securely on outlet mounting pegs. Plug short line cord
into telephone jack.
Connect short line cord and AC adapter as
shown on page 6, then grasp and squeeze to
open hinged wall mount. Swivel wall mount down
and lock in place.
Remove handset cradle tab, rotate and replace to
hold handset securely in place when wall mounted.
Rotate
antenna
fully upright
for best
results.
91-5783-10-00_ATT1487_R0.qxd 6/2/2003 12:14 PM Page 8