AT&T 1187 - Manual (Page 12)

10
Telephone Operation
Customizing the handset
Follow the steps below to program the cordless
handset. To stop at any time, press
OFF
. If the phone
rings, programming stops automatically so you may
answer the call.
Choose handset ringer sound
1 Press
PROG
to begin programming.
2 Press ^ until screen displays
RINGER
& setting.
3 Press
SELECT
to change current setting.
4 Press ^ to display 1, 2, 3, 4, or OFF. You will hear
a sample of each ringing type.
5 Press
SELECT
to select displayed ringing type and exit.
Set handset display date and time
1 Press
PROG
to begin programming.
2 Press ^ until screen displays
DATE/TIME
.
3 Press
SELECT
to view or change date and time.
4 Press ^ or V to change month, then press
SELECT
.
5 Repeat Step 4 to set day, hour, minute, and AM/PM.
6 Press
SELECT
to save selection and exit.
Choose handset display language
1 Press
PROG
to begin programming.
2 Press ^ until screen displays
LANGUAGE
.
3 Press
SELECT
to change current setting.
4 Press ^ to display ENGLISH, ESPANOL or FRENCH.
5 Press
SELECT
to select displayed language and exit.
RINGER: 1
DATE/TIME
1/01 12:00 AM
LANGUAGE
NOTE: You can choose to set the time manually, or you can allow it to
be set automatically with incoming Caller ID information. The time will be set
automatically only if you subscribe to Caller ID service provided by your local
telephone company (see page 5).
91-5783-10-00_ATT1487_R0.qxd 6/2/2003 12:14 PM Page 10