AT&T 1187 - Manual (Page 13)

11
Telephone Operation
Customizing the base
Follow the steps below to program the base. To stop at
any time, press
CLEAR
. If the phone rings, programming
stops automatically so you may answer the call.
Choose dial mode
1 Press
PROG
to begin programming.
2 Press > until screen displays
DIAL MODE
& setting.
3 Press
SELECT
to change current setting.
4 Press > to display TONE or PULSE.
5 Press
SELECT
to select displayed dial mode and exit.
Choose base display language
1 Press
PROG
to begin programming.
2 Press > until screen displays
LANGUAGE
.
3 Press
SELECT
to change current setting.
4 Press ^ to display ENGLISH, ESPANOL or FRENCH.
5 Press
SELECT
to select displayed language and exit.
DIAL MODE: TONE
LANGUAGE
NOTE: Base ringer volume can be set by adjusting the switch on the
side of the base. This switch affects only the base ringer volume; the handset
ringer volume remains unchanged.
91-5783-10-00_ATT1487_R0.qxd 6/2/2003 12:14 PM Page 11