Elitegroup G713 - Manual (Page 72)

OnBoard 1394 Device
This option specifies the 1394 device of your system.
The settings are Enabled (default value) or Disabled.
OnBoard IR Port
This option specifies the IR port address for the IR Port.
The settings are Auto, Disabled, 3F8h/COM1, 2F8h/COM2 (default value),
3E8h/COM3, 2E8h/COM4
Parallel Port Mode
This option specifies the parallel port mode.
The settings are EPP+ECP (default value), SPP, EPP and ECP.
Change Supervisor Password
This field allows you to set the Supervisor password. To set the Supervisor password,
highlight this field and press the [Enter] key. The following dialog box appears:
Enter new supervisor password:
Auto Configuration with Optimal Settings
The optimal default settings are best-case values that should optimize system performance.
To set the configuration, highlight this field and press the [Enter] key. The following
dialog box appears:
Load high performance settings [Y/N] ?
Battery Calibration
This option helps execute the calibration of the system battery.
70