Elitegroup PMI8M (V2.0) - Manual (Page 15)

9
Installing the Motherboard
Checking Jumper Settings
The following illustration shows the location of the motherboard jumpers. Pin 1 is
labeled.
Jumper Settings
Jumper Type Description Setting (default)
LVDS_PWR LVDS power
voltage 1-2: VCC3
2-3: VCC5
LVDS_PWR
CLR_CMOS 3-pin CLEAR CMOS 1-2: NORMAL
2-3: CLEAR CMOS
Before clearing the
CMOS, make sure to
turn the system off.
CLR_CMOS
1
CF_PWR
(optional)
CF power
voltage 1-2: VCC3
2-3: VCC5
CF_PWR (optional)
3-pin
1
3-pin
1