Elitegroup PMI8M (V2.0) - Manual (Page 46)

40
Using BIOS
Frequency/Voltage Control
This item enables you to set the clock speed and system bus for your system. The
clock speed and system bus are determined by the kind of processor you have in-
stalled in your system.
Auto Detect PCI Clk (Enabled)
When this item is enabled, BIOS will disable the clock signal of free PCI slots.
Spread Spectrum (Enabled)
If you enable spread spectrum, it can significantly reduce the EMI (Electro-Magnetic
Interference) generated by the system.
CPU Clock (100MHz)
Use the CPU Host Clock to set the frontside bus frequency for the installed processor
(usually 200 MHz, 133 MHz, or 100 MHz).
• +5V
• 5VSB
• VDIMM
• NB Vcore
• VBAT (V)
Phoenix-AwardBIOS CMOS Setup Utility
Frequency/Voltage Control
Item Help
f
Menu Level
Auto Detect PCI Clk [Enabled]
Spread Spectrum [Enabled]
CPU Clock [100MHz]
mnlk
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help