Antec P280 - Manual (Page 18)

18
Pin Signal Names Pin Signal Names
1 USBPower1 2 USBPower2
3 NegativeSignal1 4 NegativeSignal2
5 PositiveSignal1 6 PositiveSignal2
7 Ground1 8 Ground2
9 Key(No Connection) 10 Empty Pin
3.1
USB 2.0
Connect the front I/O panel USB cable to the USB header pin on your motherboard. Check your
motherboard user’s manual to ensure that it matches the table below:
3.2 USB 3.0
The P280 comes with two front panel USB 3.0 ports and includes an internal motherboard connector. To
access USB 3.0 capability from the front panel:
1. Identify the USB 3.0 header on your motherboard.
2. Connect the USB 3.0 header to the motherboard port. Be
sure to align the connector in the proper orientation so
that you do not damage the pins on your motherboard.
1 2
9 10
Align the connector properly to
prevent damage to your
motherboard.