Lincoln Electric IM8000 CHECKPOINT - Manual (Page 163)

IM8000 CheckPoint™ User Manual B.1
Appendix B
Overall Equipment Efficiency Examples
The following examples provide you with some sample data you can plug into the equations that begin on
page 9.5. All data is meant for illustration purposes only.
Availability Example 1
In this example, one of the welders at Advanced Manufacturing was in the states listed in Table 14.1 during
the Morning shift on 08/02/2013.
Table 14.1 Data for Calculating the Availability Factor *
Time Stamp Status Duration Time in Planned Downtime Time Not in Planned Downtime
7:00 AM Faulted 2580 0 2580
7:00 AM Faulted 1015 0 1015
8:00 AM Faulted 3381 0 3381
8:00 AM Faulted 222 0 222
9:00 AM Faulted 143 0 143
9:00 AM Welding 20 0 20
9:00 AM Idle 0 0 0
9:00 AM Faulted 3190 0 3190
9:00 AM Welding 20 0 20
9:00 AM Idle 241 0 241
10:00 AM Idle 1971 0 1971
10:00 AM Welding 392 0 392
10:00 AM Faulted 1220 0 1220
11:00 AM Welding 455 0 455
11:00 AM Idle 1166 0 1166
11:00 AM Faulted 1981 601 1380
12:00 PM Faulted 3600 2999 601
1:00 PM Faulted 1600 0 1600
1:00 PM Welding 443 0 443
1:00 PM Idle 1562 0 1562
2:00 PM Idle 1982 0 1982
2:00 PM Faulted 1500 0 1500
2:00 PM Welding 119 0 119
* All times listed in seconds.