Installation – Lincoln Electric IM722 Demo Zone K1854-2 and K1854-3 User Manual
Page 8
A-1
INSTALLATION
DEMO ZONE
A-1
TECHNICAL SPECIFICATIONS - Demo Zone (K-1854-2)
Voltage Specification
Input Connection
Specification
230 VAC single phase, 40 amps
Type 6-50P plug
ELECTRICAL INPUT REQUIREMENTS
RATED OUTPUT
HEIGHT WIDTH
DEPTH
WEIGHT
86.00 in.(With Sign)
68.00 in.
54.00 in.
2150 lbs. (w/o gas cylinders)
65.00 in. (With out Sign)
2910 lbs. (with gas cylinders)
2184.4 mm (With Sign)
1727.2 mm
1371.6 mm
975.2 kg. (w/o gas cylinders)
1651.1 mm (With out Sign)
1319.9 kg. (with gas cylinders)
The Demo Zone is intended for display and demonstration use. It is intended for light duty operation.
The Demo Zone operator must observe the 40 amp input current limitation. Because of the input power
limitation, power sources (except Ranger 250 and ZR-10) when used at maximum output must be oper-
ated at low duty cycles. Refer to Welder Operation - Duty Cycle section of this manual.
PHYSICAL DIMENSIONS