Lincoln Electric IM8002 POWER WAVE MANAGER - Manual (Page 121)

Procedure: Enabling Arc Production Monitor Appendix B. FANUC Robots
IM8002 Power Wave® Manager User Manual B.15
Move the cursor to the TCP/IP item and press F3 (DETAIL) or Enter to display the detail menu (Figure 11.9).
Figure 11.9 Enter Host Name and IP Address
In the Host Name table in the lower section of the menu enter the following:
 Host Name (local): ws.lincolncheckpoint.com
 Internet Address: 216.26.175.3
NOTE | The Host Name and IP address of the cloud server may be
different than the values shown above. Please consult
Lincoln Electric for details about this data.
Upon completion of these entries, cycle power on the robot controller and Power Wave®.
Reference: $AWELEPM System Variable
Here follows the listing of the $AWELEPM system variable structure:
$AWELEPM[1] 1/30
1 $PM_ENABLE TRUE
2 $PM_EXISTS TRUE
3 $WP_NUM 1
4 $WP_NUM_CFG 2
5 $I_WELDSCORE 95
6 $A_WELDSCORE 0
7 $PART 'ABC123456789>
8 $OPER '123456789012345678>
9 $CONS '123456789012345678>
10 $PART_CFG 2
11 $OPER_CFG 0
12 $CONS_CFG 0
13 $DEBUG 0