Lincoln Electric IM8002 POWER WAVE MANAGER User Manual
Page 16

Chapter 1. Introduction
Compatible Equipment
1.2
Power Wave® Manager User Manual
IM8002
Power Wave® AC/DC 1000, AC/DC 1000SD
Power Wave® i400
Power Wave® C300
Power Wave® S350
Power Wave® S500
The program may also be used to diagnose and modify settings in the following Welding Power Sources
outside the Power Wave® family that also use the digital common controls platform:
Invertec® V350, V450
Power MIG 300
Power MIG 350MP
NOTE |
The Power Wave® Manager application is not compatible
with legacy Power Wave® models such as the Power Wave®
450. The application also does not support dual wire
feeding system.
NOTE |
Not all Welding Power Source models have an Ethernet
port. However, you can upgrade some models to utilize
Ethernet by adding the Communication Interface module,
available from Lincoln Electric as K2207-2 or K2436-1
(depending on the Power Wave® model).
Connecting to robotic applications could vary from the
information in this manual. Please refer to the appropriate
Operators Manuals for more information.