Lincoln Electric IM604 RANGER 8 LPG - Manual (Page 11)

4 4
RANGER 8 LPG
OPTIONAL EQUIPMENT
(Field Installed)
Four Wheel Undercarriage (K933-1) - Allows move-
ment of the Ranger 8 by hand without lifting. Easily
assembles to the Ranger 8. Includes two rugged, hard
molded wheels and two durable, two ply nylon
4.80/4.00-8 pneumatic tires rated at 30 psi. The spring
loaded handle provides convenient, comfortable steer-
ing. The undercarriage comes equipped with a sturdy
frame that is capable of supporting the weight of the
machine. K934-1 and K934-2 brackets are available
for mounting gas cylinders on the undercarriage.
Bracket for Mounting a Gas Cylinder or a LPG Fuel
Cylinder to a K933-1 (K934-1) -
Easily mounts on the
back of the K933-1 Four Wheel Undercarriage to carry
either a welding gas cylinder or a lift truck type LPG
fuel cylinder with a capacity of 33.5 lbs. or 43.5 lbs. of
fuel.
Bracket for Mounting a Welding Gas Cylinder and
a LPG Fuel Cylinder to a K933-1 (K934-2) -
Easily
mounts on the back of the K933-1 Four Wheel
Undercarriage to carry both a welding gas cylinder
and a lift truck type LPG fuel cylinder with a capacity
of 33.5 lbs. or 43.5 lbs. of fuel.
Canvas Cover (K886-1) - To protect the Ranger 8
when not in use. Made from attractive red canvas
material which is flame retardant, mildew resistant,
and water repellent.
Power Plug Kit (K802-R) - Provides four 115V plugs
rated at 15 amps each and one dual voltage, full kVA
plug rated at 115/230V, 50 amps.
Accessory Kit (K710) - Includes 30 ft (9.1m) 3 AWG
electrode cable, 25 ft. (7.6m) 3 AWG work cable,
headshield with No. 12 filter, GC300 work clamp and
Cooltong® 300 electrode holder. Cables are rated at
225 amps, 40% duty cycle.
Remote Control Receptacle Kit (K892-1) - Includes
a 6-pin MS-type (Amphenol) receptacle and a local-
remote toggle switch that mounts in the case front.
Requires a Remote Control Option.
Remote Control (K857) - Consists of a control box
with 25 ft. (7.5m) of four conductor cable. Permits
remote adjustment of output voltage. (Requires
Remote Control Receptacle Kit to be mounted in
machine.)
Spark Arrester Kit (K894-1) - Includes a heavy
gauge steel, approved spark arrester and clamp for
easy mounting to muffler exhaust pipe.
GFCI Receptacle Kit (K896-1) - Includes two UL
approved 115V ground fault circuit interrupter duplex
type receptacles with covers and installation instruc-
tions. Replaces the two factory installed 115V duplex
receptacles. Each receptacle of each GFCI duplex is
rated at 15 amps, but the maximum total current from
each GFCI duplex is limited to 20 amps.
TIG Module (K930-1) - Provides high frequency and
shielding gas control for AC and DC GTAW (TIG)
welding applications. Compact case is designed for
easy carrying, complete with handle. High frequency
bypass is built in. The K938-1 Contactor Kit must be
field installed in the TIG Module when used with a
Ranger 8. For use of optional Amptrol, the K892-1
Remote Control Receptacle Kit must be installed in
the Ranger 8. The K939-1 Docking Kit is available for
mounting the TIG Module on top of the Ranger 8. The
K936-3 control cable is required if remote control is
used. The K936-4 control cable is required if remote
control is
not used.