Lincoln Electric IM591 UWW-170 - Manual (Page 8)

SP-170-I
Duty Cycle Amps Volts at Rated Amperes
25% 125 20.25
60% 85 18.25
100% 70 17.50
Welding Current Range Maximum Open Circuit Voltage Wire Speed Range
Rated DC Output: 30 – 170 amps 33 50-400IPM (1.3-10.2m/min)
A-1 A-1 INSTALLATION
Fuse or
Output Mode Input Voltage Breaker Size Input Amps Power Cord
RATED 230V/50/60Hz 30 Super Lag 20 16 Amp, 230V,
Two-Prong International
Cord Set (Supplied)
TECHNICAL SPECIFICATIONS – SP 170-I /UWW-170 (Above Code 10600)
INPUT – SINGLE PHASE ONLY
RATED OUTPUT
OUTPUT
RECOMMENDED INPUT CABLE AND FUSE SIZES
Height Width Depth Weight
12.0 in 9.75 in 16.5 in 57 Ibs
305 mm 248 mm 419 mm 25.9 kg
PHYSICAL DIMENSIONS
The SP170-I / UWW-170 is designed for industrial and professional use
in accordance with the standard EN 60974-1 / IEC 974-1.
Standard Voltage/Frequency Input Current
230V/50/60Hz 20 Amps – Rated Output
Duty Cycle Amps Volts at Rated Amperes
25% 120 20
60% 100 19
100% 75 18
Welding Current Range Maximum Open Circuit Voltage Wire Speed Range
Rated DC Output: 30 – 170 amps 32 50-400IPM (1.3-10.2m/min)
Fuse or
Output Mode Input Voltage Breaker Size Input Amps Power Cord
RATED 220V/50/60Hz 30 Super Lag 22/20 16 Amp, 220V,
Two-Prong International
Cord Set (Supplied)
INPUT – SINGLE PHASE ONLY
RATED OUTPUT
OUTPUT
RECOMMENDED INPUT CABLE AND FUSE SIZES
Standard Voltage/Frequency Input Current
220V/50/60Hz 22 Amps – Rated Output
TECHNICAL SPECIFICATIONS – SP 170-I /UWW-170 (Below Code 10600)