Lincoln Electric IM889 VANTAGE 400 (CE) - Manual (Page 11)

VANTAGE ® 400 (CE)
(1) Output rating in watts is equivalent to volt-amperes at unity power factor. Output voltage is within ± 10% at all loads up to rated capacity.
When welding, available auxiliary power will be reduced.
(2) Reduced to less than (32V for Codes 11296, 11297)(30V for Codes 11463, 11464) in the CC-stick Mode when VRD (VOLTAGE REDUCTION DEVICE) is on.
(3) Maximum per circuit breaker rating.
(4) To Top of enclosure. Add 7.35 (186.7mm) to top of exhaust. Add 3.87”(98.3mm) to top of Lift Bail.
A-1 INSTALLATION A-1
TECHNICAL SPECIFICATIONS - VANTAGE ® 400 (CE) (K2502-1, -2, -3, -4)
Make/Model Description Speed (RPM) Displacement Starting Capacities
Code No. cu. in. (ltrs.) System
4 cylinder 135.6(2.2) 12VDC Battery
27.6 HP High Idle 1565 & starter Oil: Fuel: 15 gal.
1500 RPM Bore x Stroke (Group 34; 650 8.45Qts. (8.0L) (57 L)
naturally aspirated Full Load 1500 cold crank amps) Fuel: 20 gal.
water cooled 3.43” X 3.64” 65 Amp Alternator Radiator Coolant: (75.7 L)
Diesel Engine Low Idle 1200 (87.1mm x 92.5mm) W / Built in Regulator 8.0Qts. (7.6L)
INPUT - DIESEL ENGINE
RATED OUTPUT @ 104° F (40° C) - WELDER
LUBRICATION EMISSIONS FUEL SYSTEM GOVERNOR
Full Pressure (Codes 11296, 11297) EPA Tier Il Mechanical Fuel Pump, Auto air bleed Mechanical
with Full Flow Filter (Codes 11463, 11464) EPA Tier IV Interim system, Electric shutoff solenoid, Indirect fuel injector.
Compliant
AIR CLEANER ENGINE IDLER MUFFLER ENGINE PROTECTION
Low noise Muffler: Shutdown on low oil
Single Element Automatic Idler Top outlet can be rotated. pressure & high engine
Made from long life, aluminized steel. coolant temperature
ENGINE WARRANTY: 2 years / 2000 hours, all non-electric components, 3 years major non-electric compo-
nents . See Perkins warranty for details.
Welding Process
DC Constant Current
DC Pipe Current
Touch-Start™TIG
DC Constant Voltage
Arc Gouging
Output Range
30 TO 400 AMPS
40 TO 300 AMPS
20 TO 250 AMPS
14 TO 34 VOLTS
90 TO 400 AMPS
Max. Weld OCV
@Rated Load RPM
60 Volts (2)
60 Volts
Welding Output
Current/Voltage/Duty Cycle
350A / 34V / 100%
300A / 32V / 100%
250A / 30V / 100%
350A / 34V / 100%
350A / 34V / 100%
Auxiliary Power (1)
14,000 Watts Peak / 13,200 Watts Continuous, 50 Hz 400 Volts 3-Phase (Euro/UK)
6,900 Watts Peak (3) / 6,900 Watts Continuous, 50 Hz 230 Volts 1-Phase (Euro)
3,400 Watts Peak (3) / 3,400 Watts Continuous, 50 Hz 230 Volts 1-Phase (UK)
3,400 Watts Peak (3) / 3,400 Watts Continuous, 50 Hz 115 Volts 1-Phase (UK)
Sound Levels (Sound power: 96 dB Lwa)
ENGINE
RATED OUTPUT @ 40° C (104° F) . - GENERATOR
Perkins 404C-22
K2502-1, -2
11296, 11297
Perkins 404D-22
K2502-3,-4
11463, 11464
HEIGHT WIDTH DEPTH WEIGHT
35.94 (4) in. 27.00 in 60.00 in.
913 mm 686 mm 1524 mm
PHYSICAL DIMENSIONS
1230 lbs. (559kg.)