LT Security PTZ217X12 Installation Manual - Manual (Page 16)

Installation Manual of 4-inch Speed Dome
7
VI
EOD
Orange GND
Yellow ALARM_IN2
Green ALARM_IN1
Blue ALARM_OUT1A
White ALARM_OUT1B
Labels
RED
BROWN
BLACK
YELLOW
ORANGE
AC24V
AC24V
R485 -
R485 +
Label Description
Video Output
Figure 1-11 Cables of Analog Speed Dome
VI
EO D
Label 1
Label 2
RED
BROWN
BLACK AC24V
AC24V
Label 2 Description
YELLOW
ORANGE
R485 -
R485 +
Label 1 Description
Black AUDIO_IN
Brown GND
Red AUDIO_OUT
Orange ALARM_IN1
Yellow GND
Green ALARM_IN2
Blue ALARM_OUT1A
Purple ALARM_OUT1B
Figure 1-12 Cables of Network Speed Dome
1.2 DIP Switch Settings
The DIP switch is used for setting the address, baudrate, protocol, etc. for the speed dome, with
value ON=1 and OFF=0, as shown in Figure 1-13.
The switches from the first to the fifth are used to set the address. The sixth and seventh switches