LumaSense Technologies M67 - Manual (Page 26)

M67, M67S Manual
25
7.6 Aiming flange assembly
This assembly provides a firm mounting for the INFRADUCER while allowing adjustment of the optical path to a maximum of
5° in any direction perpendicular to the flange. When this has been ordered, /XPD6HQVH will assemble the spring loaded flange
RQto the Air Purge Assembly. Care must be taken to avoid backing out any of the three screws beyond the thread. Figure 14
displays the flange mounting dimension.
Figure 18 - Air Purge Assembly With Optional Aiming Flange.