5 software infrawin, 1 connecting the pyrometer to a pc, 2 installation – LumaSense Technologies IN 6/78-L User Manual

Page 21: 3 program start

Advertising
background image

IN 6/78-L Operating Manual

Software InfraWin · 21

5 Software InfraWin

The operating and analyzing InfraWin software is included with delivery of the pyrometer. In

addition to allowing you to make parameter adjustments, the InfraWin software also provides
temperature indication, data logging, and measurement analysis features.
This section gives an overview about the functions of the software. It also provides a description
of the individual icons found in the program's help menu. Click on the F1 button after loading
InfraWin or click on the ? in the menu bar.

The following descriptions refer to software InfraWin version 5.0. The latest version is available
for free as download from the homepage www.lumasenseinc.com.

5.1 Connecting the pyrometer to a PC

The program InfraWin can operate up to two devices. Two devices using RS485 may be operated
simultaneously by the same interface, if two different addresses have been properly entered

(see section 4.8 Address for more information).

5.2 Installation

To install the InfraWin software, select setup.exe from the InfraWin-CD or from the downloaded
and unpacked zip file from the internet and then follow the installation instructions.

5.3 Program start

The first time you load InfraWin 5, you will be prompted to select a default language. The
InfraWin software is available in German, English, Spanish, French, Portuguese, and Chinese.
Once installed, click Language/Languages if you would like to select another language.
On the start page, the screen shows the following start menu icons.

Opens a saved file
Storage of measured values for further processing

Starts measurement for the selected device

Setting of the parameters of the instruments

Time interval between two measurements

Listing of measured or stored values in tabular form

Processing of measured (stored) readings in graph form

Processing of measured (stored) readings in a text file

Calculation of spot sizes in various measuring distances

Only if available: controls the programmable controller PI 6000

Search I/O module

Advertising