LumaSense Technologies IN 6/78-L - Manual (Page 23)

IN 6/78-L Operating Manual Software InfraWin · 23
Emi: AutoFind: If the true temperature of the measured object is known, you can calculate the
emissivity of the measured object using the Emi: AutoFind function:
A measured temperature is displayed with the
current set emissivity (in this example 100%) (here:
416.1 °C).
If you press Emi: Autofind a window will open
which allows you to enter the "true" temperature
(here 430 °C).
Once the temperature entry has been entered and
confirmed with Calculate, InfraWin will then
calculate the emissivity which occurs with the new
temperature (here 97.3%). This is displayed
immediately and can be used for further
temperature measurement.
5.5 Measurement online trend
The Measurement online
trend window displays:
· temperature as graphical diagram
· internal temperature of the instrument
· current temperature
· the quantity of the measured values
and file size of the current
measurement.
The example shows a sample reading over the
period of approximately 15 seconds with a
temperature range between 400 and 800 °C. The final temperature (at the end of the reading) is
431 °C.
The Mark Zone button allows you to color mark a temperature range for easier recognition.
The Threshold button allows you to set a temperature value as a baseline to prevent recording
values above or below the baseline temperature. This allows you to keep the output file size
small.
The Scaling Trend button allows you to scale temperature trend view.