LumaSense Technologies INNOVA 1303 - Manual (Page 17)

Chapter 2
________________________________________________________________________
_______________________________________________________________________
BE1085-14
1303 Multipoint Sampler and Doser LumaSense Technologies A/S
Page 17 of 60
Fig. 2.4. Dipswitch settings binary “0”
If the switch is up, it represents a binary “1”. See Fig. 2.5.
Fig. 2.5 Dipswitch settings binary “1”
The interface address of the 1303 is set at the factory to 01111 (deci-
mal value 15), see Fig. 2.6 . If this is not suitable for your system, use
the switches to set an address appropriate to your system.