Rhino Shelter HOUSE-14W X 42L X 15H User Manual

Assembly instructions

Advertising

Table of contents

Document Outline

Step 5. Begin the Top Crest Cross Rail by placing the last ECR-8003 PLAIN END CROSS RAIL as the first end UNDERNEATH the END ARCH. Secure loosely with carriage Bolt # CBN-7005-3, with washer and nut facing interior of unit.
- Step 6. Continue connecting each arch section in the same manner. NOTE: The Top Crest Cross Rail (only) will be UNDER the END ARCHES and OVER the INERIOR ARCHES. All the other Cross Rails will be on the inside of the frame. Washer and Nuts must always face towards the interior of the unit. Please note that Arches #4 and #8 have the FEET, like the End Arches. DO NOT completely tighten down bolts that connect the Cross Rails to the END ARCHES, they must be removed for End Panel Zippered Door Installation.
Step 7. The key to a successful installation is getting the frame placed properly and secured in place. The steps to accomplish this are:
- ARCH BASE SUPPORT
ANCHOR STEP 2
END DOOR STEP 1
END DOOR STEP 2. - ATTACH END DOOR
- STEP 10 – MAIN COVER
MAIN COVER STEP 4. RECHECK COVER & DOORS
- MAINTENANCE AND CARE
  - Item Number
  - Quantity