Actiontec electronic Dual PC Modem R7000M - Manual (Page 28)

25
Chapter 4 Custom Setup
Setting the IP Address Range
The beginning and ending IP addresses define the IP address range of the Modem.
If the default values are left intact, the Modem supplies a unique IP address
between 192.168.0.4 and 192.168.0.254 to each computer on the network. Note
that the first three groups of numbers of the addresses are identical; this means
they are on the same subnet. The IP address of the Modem must be on the same
subnet as the IP address range it generates. For instance, if the Modems’s IP
address is changed to 10.33.222.1, set the beginning IP address to 10.33.222.4, and
the ending IP address to 10.33.222.254.
Beginning IP Address
Displays the IP address at which the DHCP server starts assigning IP addresses.
Actiontec recommends keeping the factory default setting (192.168.0.4).
Ending IP Address
Displays the IP Address at which the DHCP Server stops assigning IP addresses.
Actiontec recommends keeping the factory default settings (192.168.0.254).
Subnet Mask
Displays the Subnet Mask. Actiontec recommends keeping the factory default set-
tings (255.255.255.0).
Save Configuration
Clicking Next in the DHCP Server Configuration screen generates the “Save
Configuration” screen. Click Save and Restart to save changes.