Windows 2000 – Actiontec electronic Dual PC Modem R7000M User Manual
Page 46
Advertising
43
Appendix A Setting Up Static IP Address
14. Click
OK
. The
TCP/IP
Properties window disappears.
15. If there is a check in the box next to “Detect connection to network media,”
click on it to uncheck the box.
16. In the Network window, click
OK
. The Network window disappears.
17. The “System Settings Change” window appears, asking whether the computer
should be restarted. Click Yes.
The computer restarts. It is now set up with a static
IP
address, allowing the user to
access the Modem’s Advanced Setup utility.
Windows 2000
1.
From the desktop, click on the Start button in the lower left corner.
2. From the menu that appears, select Settings.
Advertising