Actiontec electronic Dual PC Modem R7000M User Manual
Page 59
56
Actiontec Dual PC Modem User Manual
2.
When the “
TCP/IP
” window appears, select Edit from menu bar, then select
User Mode.
3.
When the “User Mode” window appears, select Advanced, then click
OK
.
4.
In the “
TCP/IP
” window, select Ethernet from the “Connect via” drop-down
list.
5.
Select Using
DHCP
Server from the “Configure” drop-down list.
6.
Ensure the “Use
802.3
” option is not checked.
7.
Disregard any addresses in the
IP
Address text boxes. They will be reacquired
when the first connection is made.
8.
Click Options and when the “
TCP/IP
Options” window appears, select Active.
Ensure the “Load only when needed” option is not checked, then click
OK
.
9.
Close the “
TCP/IP
” window and when prompted to save changes, click Save.
10. Restart the computer. The
TCP/IP
settings are configured.
Next, go to “Connecting to the
ISP
” on page
115
.