Actiontec electronic Dual PC Modem R7000M - Manual (Page 42)

39
Appendix A Setting Up Static IP Address
14. Click OK . The TCP/IP Properties window disappears.
15. In the Network window, click OK . The Network window disappears.
16. The “System Settings Change” window appears, asking whether the computer
should be restarted. Click Yes.
The computer restarts. It is now set up with a static IP address, allowing the user to
access the Modem’s Advanced Setup utility.
Windows Me
1. From the desktop, click on the Start button in the lower left corner.
2. From the menu that appears, select Settings.