Seca 336 - Manual (Page 13)

Model 336 13 GB
Battery and mains (option)
If or bAtt appear in the display, you should change the batteries. You need 6
1.5 V type AA, R6 or LR6 round-cell batteries.
– Carefully turn over the scale so that the
base of the scale is accessible.
– Press the latches of the battery com-
partment towards the centre of the
base and take off the cover.
– Place the new batteries in the battery
compartment.
Check that polarity is correct!
– Close the cover and then turn the scale
back up the right way.
4. Setting up the scale
The scale is fully assembled on delivery.
– Remove the packaging and place the
scale on a firm, level surface.
– Undo the locknuts using the four foot
screws (1).
– Align the scale by undoing the foot
screws. The air bubble in the spirit level
must be right in the centre of the
circle (2).
– Then re-tighten the locknuts (3).
– Ensure that only the feet of the scale are
in contact with the floor. The scale may
not be in contact at any other point.
1.
2.
3.
Libelle Spirit level
Connection for
mains unit Battery
compartment