Seca 745 - Manual (Page 9)

9
9. Fine adjustment
The hand and counter-hand can be set
exactly by turning the fine taring screw. To
do so, the fine taring screw is turned to the
right or left until the hand and counter-hand
line up exactly.
8. Fixing the tare weight in position
Fix the tare weight in position using the
knurled nut. Objects on the tray such as
pads etc. weighing up to 3000 g can be
tared using the tare weight.
Operation
Once the scale has been prepared as descri-
bed in the section entitled “Set up and align
scale”, you can start weighing. Place the in-
fant in the tray and first slide the large sliding
weight to approximately the right weight.
Now use the small sliding weight to determi-
ne the exact weight. To do so, slide the small
sliding weight along until hand and counter-
hand line up.
Read the weight value off the scale on the
sliding weight bar.
Cleaning
Clean the housing and the tray as required
using a domestic cleaning agent or com-
mercially-available disinfectant. Follow the
manufacturer’s instructions.