Automatic switching of weighing range, Switching off the scale – Seca 675 User Manual

Page 69

Advertising
background image

Operation • 69

English

10. To deactivate the BMI function, briefly press the

Enter key (Enter).

Automatic switching of

weighing range

The scale has two weighing ranges. In weighing range
1 (

), capacity is reduced, but the increments in the

weight display are finer. In weighing range 2 (

), you

can use the maximum capacity of the scale.

After the scale is switched on, weighing range 1 is
active. If a particular weight is exceeded, the scale
automatically switches to weighing range 2.

To switch back to weighing range 1, proceed as
follows.



Completely remove the load from the scale.
Weighing range 1 is active again.

Switching off the scale



Press the Start key.

enter

BMI

Rating

Below 18.5

Patient is underweight. There could be anorexic tendencies.
Weight should be increased to improve well-being and perfor-
mance. If in doubt, seek the advice of a consultant.

Between 18.5 and
24.9

The patient's weight is normal.

Between 25 and 30
(incipient obesity)

The patient is slightly to moderately overweight. He or she
should lose weight if already suffering from a disease such as
diabetes, high blood pressure, gout or disorders of fat metab-
olism.

Over 30

Weight needs to be lost urgently. The metabolism, the circula-
tory system and the bones are all under strain. A strict diet,
lots of physical activity and behavioral training are all recom-
mended. If in doubt, seek the advice of a consultant.

Advertising
This manual is related to the following products: