Spectra Precision Survey Pro 3.80 Recon GPS Reference Manual - Manual (Page 36)

GPS Reference Manual
36
Data Collection
6XUYH\ 'DWD &ROOHFWLRQ 
The Data Collection screen is used to collect new points for the
current job.
GPS Status : displays the current solution type, the radio
reception quality, the number of satellites used and the
horizontal precision computed by the receiver. When
this area is tapped, the GPS Status screen (Page R-20)
will open.
Point : is where you enter the point name for the next
point to be stored.
Description : is where you enter the description for the
next stored point.
Rover : is where you enter the measured height of the
rover antenna.
6HWXS +5 : opens the Receiver Antenna screen discussed
on Page R-29 where the details of the antenna are
defined.
3RVW 3URFHVV : opens the Receiver Session screen, described on Page
R-76.
&RQWURO 3RLQW : opens the Control Point screen (Page R-31).
)HDWXUH : opens the Feature Collection screen, where various
automatic and manual data collection options are available.
2IIVHW : opens the Offset Shots screen, where a point can be collected
and stored at a specified offset.
3RLQW : opens the Occupy Data Points screen (Page R-39), used to
collect a new point.