Spectra Precision Survey Pro 3.80 Recon GPS Reference Manual - Manual (Page 41)

Survey Menu – RTK
41
Mapping Plane
6XUYH\ 3URMHFWLRQ +RUL]RQWDO 
The Horizontal tab of the Projection screen is explained below for
when the horizontal projection type is set to
Mapping Plane .
Status Line : The lines of text on the top of the screen display the
status of the horizontal projection solution. Status will be:
•
No zone selected : No map projection zone or
localized site is set.
•
Map projection zone selected . A map projection from
the database is set. The zone group and zone name
of the selected zone are displayed.
•
Zone based localization solved . Horizontal
localization parameters are applied to the selected
map projection. The zone group and site name are
displayed.
Note: Not all configurations of Survey Pro can setup
ground sites. However, all configurations of Survey Pro
can read ground sites.
•
Ground coordinate system solved . The selected map projection
zone, or the localized zone based site, has a ground coordinate site
applied.
•
Localized ground coordinate system solved . The selected map
projection zone, or the localized zone based site, has a ground
coordinate site applied.
6HOHFW =RQH« : opens the Mapping Plane Setup screen, where you
can choose a zone or site from the data base, key in a custom zone,
and delete zones or sites from the database.
6KRZ 'HWDLOV« : opens the Projection Details screen, where the
complete details of the localization solution, reference map projection,
and Geoid model are displayed.