Spectra Precision Survey Pro 3.80 Recon GPS Reference Manual - Manual (Page 37)

Survey Menu – RTK
37
Feature Collection Screen
6XUYH\ 'DWD &ROOHFWLRQ )HDWXUH 
The Feature Collection screen is used to partially automate the
process of data collection. It is useful when collecting data for groups
of points that describe the same feature.
Note: If you hotkey to another screen while using the Feature
Collection routine, the Feature Collection screen will be suspended
until you return to it.
Points to be Stored : displays the starting point name
and description of the group of points to be stored.
Method : is where you select the method of continuous
data collection. The available methods are described
below:
•
Cts. by time : After accepting the first point,
additional points will automatically be stored
after the specified time (in seconds) has elapsed.
Each successive point name is incremented to the
next available name. When you are finished
collecting points, tap
'RQH.
•
Cts. by dist 2D / 3D : After accepting the first
point, additional points will automatically be
stored after traveling the specified horizontal or
3D distance. Each successive point name is incremented to
the next available name. When you are finished collecting
points, tap
'RQH.
•
Manual : stores points in the same way as when tapping
3RLQW
from the Data Collection screen, except after a point is stored,
you will remain in the Occupy Data Points screen where
additional points can be store with successive point names
and the same descriptor.
•
Manual: multi descriptions : performs the same function as
the Manual routine, above, except you are prompted for a new
description with each point stored.