Autostart CT-5060 - Manual (Page 9)

Car Finder
When enabled, the Car Finder option will help you locate your vehicle by sending a
pulsating signal through the horn or the siren. To hear the signal, press the
LOCK
and
UNLOCK
buttons simultaneously. This will produce a pulsating signal for the time you keep
the buttons pressed.
Diagnostics – Chirps Diagnostics – Parking Lights
Parking Lights Flash Rate (Normal Operation)
Flashes Description
1
• Doors locked, Starter Kill armed.
• End of Run Time.
•
TRUNK
button pressed
• Start signal received by the Module.
• Cold Weather Mode cancelled.
• Cannot start after maximum number of attempts is reached.
2
• Run Time cancelled.
• Remote start attempt cancelled by remote.
• Doors unlocked, Starter Kill disarmed.
• Exit Remote Valet
• Exit ignition valet
Chirps Description
1
• Lock and arm the system.
• Lock confirmation.
• Entering Mode 1 in the programming options.
• Start attempt when engine is already running under remote control.
2
• Unlock and disarm.
• Transmitter learnt.
• Entering Remote Valet.
• Entering Mode 2 in programming options.
3
• Lock and arm – a zone is unprotected.
• Entering Mode 3 in the programming options.
4
• Unlock and disarm – an intrusion occurred.
• Entering Tach Learning procedure.
5 • Siren or Horn Chirp Timing adjustment.
Constant up
to
60 seconds
• In Siren Mode: alarm condition generated by an intrusion, by Panic
Mode or when the Module is powered up. The Siren will sound for
60 sec.
Constant up
to
30 seconds
• In Horn Mode: alarm condition generated by an intrusion, by Panic
Mode or when the Module is powered up. The Horn will sound for
30 sec.
P. 9 User Guide CT-5060