Adaptec 58300 - Manual (Page 30)

Chapter 6: Creating a Bootable Array ●
30
Creating an Array with Adaptec Storage Manager
This section describes how to use the Adaptec Storage Manager configuration wizard to build a
RAID 0, 1, or 10 array.
Note: You will need the HostRAID Installation CD to complete this task.
To create a RAID 0, 1, or 10 array:
1 Insert the HostRAID Installation CD into your CD drive, then restart your computer.
2 When prompted, select the language you want, then press Enter.
3 Review the license information, then press Enter.
The Main Menu opens.
4 Click Launch Configuration Utility.
Adaptec Storage Manager opens.
5 Click Create.
The Configuration wizard opens.
6 Select Express configuration..., then click Next.