About the arc utility, About the afu, Which utility should i use – Adaptec 58300 User Manual
Page 43
Chapter 9: Managing Your Storage Space
●
43
About the ARC Utility
The Adaptec RAID Configuration (ARC) utility is a BIOS-based utility that you can use to
create and manage controllers, disk drives and other devices, and arrays. The ARC utility
comprises these tools:
●
Array Configuration Utility (ACU)—For creating and managing arrays, and initializing
and rescanning disk drives.
●
SerialSelect Utility—Used to change device and HostRAID controller settings.
●
Disk Utilities—For formatting or verifying disk drives.
The ARC utility is included in your controller’s BIOS. For more information, see
Note:
The ARC utility is primarily intended for pre-operating system installation
configuration.
About the AFU
The Adaptec Flash Utility (AFU) is a text-based DOS utility that you can use to update, save, or
verify your HostRAID controller’s firmware BIOS and Non-Volatile Random Access Memory
(NVRAM).
Caution:
Although the AFU contains safeguards to prevent you from accidentally damaging
your HostRAID controller’s flash contents, it is still important to use the AFU carefully and
correctly to avoid rendering your HostRAID controller inoperable. Adaptec recommends that
only advanced users familiar with working in DOS use the AFU.
Which Utility Should I Use?
To create a bootable array, Adaptec recommends that you use the BIOS-based ARC utility
(see above).
For all subsequent storage management tasks, Adaptec recommends that you install and use
Adaptec Storage Manager (see
). As a full-featured software application with a graphical
user interface (GUI), it is the easiest to use and offers the widest range of management
functions.
!