Installing with sco openserver – Adaptec 58300 User Manual
Page 40
Advertising
Chapter 8: Installing the Driver on an Existing Operating System
●
40
Installing with SCO OpenServer
To install the driver on OpenServer:
1
Start your computer, then insert the driver disk.
2
Begin the driver package installer:
# pkgadd -d diskette1
OR
# pkgadd -d diskette1 adp94xx
3
At the installer prompt, type
go
.
4
Select 1 for the aacraid package.
5
When the installation is complete, select q to quit the installer.
6
Reboot your computer and remove the driver disk.
Continue with
Managing Your Storage Space on page 41
.
Advertising
This manual is related to the following products: