Van Air Systems PLD 8-7.2 / 36-7.2 - Manual

WARNING
DO NOT REMOVE, REPAIR OR REPLACE ANY ITEM ON THIS VESSEL WHILE IT IS UNDER PRESSURE.
DO NOT OPERATE IF THERE IS A LEAK IN VESSEL. IMMEDIATELY TAKE VESSEL OUT OF SERVICE
AND CALL YOUR CERTIFYING AUTHORITY. IF THERE IS A LEAK, DEPRESSURIZE VESSEL, INSPECT,
REPAIR AND OR REPLACE AS NECESSARY.
DO NOT OPERATE ABOVE MAXIMUM WORKING PRESSURE (MWP) AND OR ABOVE MAXIMUM
OPERATING TEMPERATURE (DEGREES
O F).
DO NOT WELD OR GRIND VESSEL. IT WILL NOT BE SAFE TO OPERATE.
DO NOT OPERATE IF THE VESSEL HAS BEEN DAMAGED BY FIRE. TAKE OUT OF SERVICE
IMMEDIATELY AND NOTIFY YOUR CERTIFYING AUTHORITY.
ANY DAMAGE TO VESSEL CAN MAKE IT UNSAFE. INSPECT OUTSIDE AND INSIDE OF VESSEL
REGULARLY FOR CORROSION OR ANY DAMAGE (I.E., DENTS, GOUGES OR BULGES). IF
DAMAGED, TAKE OUT OF SERVICE IMMEDIATELY. CALL YOUR CERTIFYING AUTHORITY.
INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS
FOR
PIPE LINE DEHYDRATOR FOR NATURAL GAS
PLD 8-7.2 thru PLD 36-7.2
PN 32-0276
REV B
JANUARY 2011
