Van Air Systems Mounting Bracket Kits - Manual

PRINTED IN THE USA ©2000 VAN AIR SYSTEMS INC. 2950 MECHANIC STREET, LAKE CITY, PA 16423
INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS
MB-1 THRU MB-3-2
MOUNTING BRACKET KITS
FOR F200 SERIES FILTER HOUSINGS
WARNINGS
READ INSTRUCTIONS CAREFULLY BEFORE MOUNTING FILTER.
DO NOT INSTALL MB TO EQUIPMENT THAT IS UNDER PRESSURE.
DO NOT DRILL MOUNTING HOLES BEFORE ENSURING THAT NOTHING WILL BE DAMAGED WHILE DRILLING.
DO NOT MOUNT FILTER WITH UNDERSIZED SCREWS.
•
•
•
•
®
APRIL 2000
P/N: 432-10020
PRODUCT PURPOSE & FUNCTION:
Van Air's Mounting Bracket Kits are designed for wall mounting F200 series filter housings. Brackets and mounting compo-
nents are made of zinc plated steel or stainless steel for superior corrosion resistance.
INSTALLED DIMENSIONS
TYPE USED ON F200- PART NO A B C D E
MB-1 55 84-0720 4-1/2 1-1/4 1-3/4 3-5/16 5-1/4
MB-1-2 15 THRU 25 84-10130 3-3/4 1-1/4 1-3/4 3 4-7/16
MB-2 85 THRU 265 84-0721 5-15/16 1-9/16 2-9/16 4-7/8 6-11/16
MB-2-2 350 THRU 500 84-10131 6-1/2 2 2-3/4 5-1/4 7-5/16
MB-3-2 600 THRU 1000 84-10132 9-5/16 3-3/4 3-15/16 7-7/16 10-1/4
MOUNTING BRACKET DIMENSIONS
TYPE A B C D E
MB-1 2-15/16 1-9/16 13/16 1-3/4 1/4
MB-1-2 2-15/16 1-9/16 13/16 1-3/4 1/4
MB-2 4-5/16 2-3/8 1 2-9/16 5/16
MB-2-2 4-3/4 2-3/4 1 2-3/4 5/16
MB-3-2 7-1/8 4-15/16 1-3/16 3-15/16 3/8
FIGURE 1 MOUNTING BRACKET DIMENSIONS
FIGURE 2 INSTALLED DIMENSIONS
A
B
D
C
E
VIEW FROM SIDE OF FILTER
A
(DRILL HOLES)
E
B
(DRILL HOLES)
HEX NUT
(4 EACH)
F
C
D
FILTER INLET/
OUTLET
CONNECTION
FILTER
HEAD
BRACKET
VIEW FROM FRONT OF FILTER
FILTER HEAD
BRACKET