Safety, Never – Walker Magnetics NEO-HV SERIES User Manual
Page 8
8
O.S. Walker Inc., NEO Permanent Lifting Magnets
FOR FAST, EASY LIFTING WITH YOUR WALKER
NEO-125, NEO-250, NEO-500,
NEVER attempt to turn the magnet on or off
in the “Lifting Guidelines” section of this
on loads that are too thin will result in the
1
NEVER
attempt to operate
this lift magnet until you
read and understand the
OPERATOR’S MANUAL &
SAFETY INSTRUCTIONS
for the NEO-125, NEO-250,
NEO-500, NEO-1000 AND
NEO-2000 Lifting Magnets.
SAFETY
If you have any diffi culty lifting a load, DON’T LIFT IT.
Ask your supervisor for help or call O.S. Walker Co.,
Inc., for advice at 1-800-W-MAGNET
When working in an area using lifting magnets, wear safety
glasses, work gloves, steel-toed shoes and a safety hat.
2
Check the condition of the magnet prior to
every lift. WIPE clean the bottom of the magnet
and the area on the load where the magnet will
be located. File away burrs.
5
Check to be sure no one is near the load to be
lifted. Inform others in the area that a lift is to be-
gin. Lift the load 2 to 3 inches (50 to 75 mm) and
then jar the load to insure that adequate holding
power is available.
ALWAYS STAY CLEAR OF THE LOAD.
Lift and move the load SMOOTHLY. Avoid
jarring and swinging the load while it is in
transit. KEEP THE LOAD LEVEL. NEVER
let the load come in contact with any ob-
struction.
6