Return and repair instructions, 6 return and repair instructions -1, For fast response, call 1-800-w-magnet – Walker Magnetics TURBOMILL 40B User Manual
Page 26: 6 return and repair instructions
O.S. WALKER Co. Inc., Turbomill Electroperm Chucks
DD15508M.doc Rev. ~, September 17, 2002
6 RETURN AND REPAIR INSTRUCTIONS
For warranty and non-warranty repairs on any part of your chuck system, contact O.S. Walker, Inc.
TOLL FREE at 1-800-W-MAGNET. A return authorization number will be issued along with any
applicable packaging and shipping instructions. After receipt of the components to be repaired,
O.S. Walker, Inc. will perform an inspection and provide an estimate of the repair costs at no
charge to the customer. Authorization from the customer must be obtained by O.S. Walker, Inc.
before repairs are made. Transportation charges, both to and from the factory, are the sole
responsibility of the customer.
FOR FAST RESPONSE, CALL 1-800-W-MAGNET
O.S. WALKER
Rockdale Street, Worcester, MA 01606
(508)-853-3232 FAX (508)-852-8649
3508 Glenridge Drive, Chino Hills, CA 91709
(909)-597-4785 FAX (909)-597-0581
901 Arvin Avenue, Stoney Creek, Ontario, L8E5N9 Canada
(905)-643-3338
In Canada: 1-800-267-4678 FAX (905)-643-6111
e-mail: info@walkermagnet