Introduction, 1 introduction -1, 1 introduction – Walker Magnetics TURBOMILL 40B User Manual
Page 5
O.S. WALKER Co. Inc., Turbomill Electroperm Chucks
DD15508M.doc Rev. ~, September 17, 2002
1-1
1 INTRODUCTION
Thank you for purchasing this O. S. Walker, Inc. Chuck. If used and maintained properly, it should
serve you for many years. However, if installed and used improperly it can be rendered inefficient
and unsafe. Therefore, it is absolutely essential that anyone who uses this chuck and is
responsible for its application be trained on how to use it correctly.
Read this manual carefully to learn how to operate and maintain your chuck. Failure to do
so could result in serious injury, or even death, to yourself and others in the area.
This manual should be considered a permanent part of your chuck and should always be
available to all operators and remain with the chuck if it is re-sold.
NOTE: Before using chuck, record this data from the *nameplate for future use in
obtaining service.
MODEL NO._____________, PART NO._____________, SERIAL NO. __________
* information located on the terminal box end of the chuck body.
To request additional copies of this manual, call 1-800-962-4638 in the USA;
In Canada: 905-643-3338; In Europe: 31-4973-83835