Wellsaw 1016 - Manual (Page 12)

11
Model 1016 History
The most widely used of the Wellsaws has been the Model 8. Originally introduced in 1933, it has
continued, with constant improvements in design and materials, to be built today in the form of the
Model 1016.
The original Model 8 used a 3/4" blade, a 3/4 HP motor and had a 9" x 16" cutting capacity.
Successive improvements in this popular design were known by various model numbers. The Model
850 featured a 1" blade. Model 1000 offered a larger 10" x 16" cutting capacity with a 1 HP motor
and Guide-A-Matic, a patented mechanism for controlling blade roller guides automatically.
Today’s Model 1016 includes a coolant system, a precision ground bed, the Rite-Tensioning
Device® to insure more positive blade tension control, and low voltage controls for operator safety.
One Year Limited Warranty
This Wellsaw is warranted against defects in material and workmanship installed or performed at
our factory. Within one year from the date of purchase, we will, free of charge, at our option,
either repair or replace any part of the Wellsaw which our examination discloses to be defective
because of workmanship or a defect in material, and to make any necessary service adjustments
as required. This warranty does not apply if the Wellsaw has been subject to accident, alteration,
abuse, misuse or which fails due to lack of care or as the result of inadequate power supply and
specifically does not apply to normal wear of moving parts such as bearings, gears, pinion or
blade. There is no warranties beyond the description on the face hereof. Wellsaw shall not be
liable for consequential or incidental damage suffered or incurred with respect to defective
material or workmanship.
All transportation costs or parts submitted to Wellsaw under this warranty must be paid by the
saw’s owner. No products or parts are to be returned to our factory without first obtaining
written permission.
NOTE: Be sure to fill out and return the Warranty Card provided with this Wellsaw