Wellsaw 1016 - Manual (Page 21)

Carbide Guides
Up to Serial Number 2499
(option)
1 101522-002 Blade Guide Assembly, D.E.
(includes items 5-27 minus 13)
2 105406-002 Blade Guide Assembly, I.E.
(includes items 5-27 minus 12)
3 150061 Guide Support Assembly, D.E.
(includes items 12-27 minus 13)
4 106659 Guide Support Assembly, I.E.
(includes items 13-27)
5 105335-001 Hand Wheel & Screw
6 101453 Guide Bracket
7 100034-006 Set Screw, 5/16-18 x 7/8
8 100034-005 Set Screw, 5/16-18 x 3/4
9 M-092 Roller Adjuster
10 100004-018 Cap Screw, HH, 5/16-18 x 1
11 100029-002 Flat Washer, 1/4
12 106389 Roller Support, D.E.
13 106315 Roller Support, I.E.
14 100008-018 Cap Screw, SH, 5/16-18 x 3/4
15 106317 Fixed Carbide Guide
16 106319 Spring Backed Carbide Guide
17 101300 Eccentric Axle Nut
18 100004-016 Cap Screw, HH, 5/16-18 x 7/8
19 100029-003 Flat Washer, 5/16
20 101186 Roller Guide Washer (3 req'd)
21 100416-003 Bearing, Side (2 req'd)
22 101178 Roller Axle
23 101177 Eccentric Roller Axle
24 100127-003 Set Screw, Nylon Point, 1/4-20 x 5/16
25 106285 Guide Pre-load Assembly
26 101179 Roller Axle, Top
27 100406-002 Bearing, Top
28 100220-040 Coolant Hose
29 100219-001 Hose Clamp
30 102617 Hose Adapter
31 100226 Needle Valve
32 101670 Coolant Nozzle
33 100246-001 Pipe Strap
34 100000-018 Machine Screw, RH, 10-32 x 3/8
Note: In The Blade Guide Assembly Illustration, Item 12, is the Drive End Assembly.
For the Idle End Assembly, order item 13. All Other Parts are Interchangeable.
20