Wellsaw 1016 - Manual (Page 31)

1016 Motor & Gear Box
Starting S/N 2760 the 1016 gear box began
1 150428 Belt Guard (starting S/N 3100) using two bearings (item 23) in the cover
105531 Belt Guard (before S/N 3100) (item 21) and a snap ring (item 22) at the
2 100063 Thumb Screw, w/Washer, 1/4-20 x 1/2 end of the drive shaft (item 25).
3 100066-005 V-Belt
4 101172-001 Motor Pulley, 4 Step, 5/8 Bore
5 100034-003 Set Screw, 5/16-18 x 3/8 NOTE:
6 100056-014 Key, 3/16 x 3/16 x 1-1/2 It is very important to provide the saw serial
7 100836-031 Motor, 2 HP, 115-230/60/1 number when ordering gearbox parts.
100836-032 Motor, 2 HP, 208-230-460/60/3
100836-007 Motor, 1 HP, 575/60/3
8 105330 Motor Mount (through S/N 3317)
105753 Motor Mount (starting 3318)
9 105533 Belt Guard Support
10 100004-018 Cap Screw, HH, 5/16-18 x 1
11 100029-003 Flat Washer, 5/16
12 100025-002 Lock Washer, 5/16
13 100017-002 Hex Nut, 5/16-18
14 100218-010 Jiffy Clip #125
15 100555-043 Wire, Motor, 62" Long, 14/4
16 100597-001 Connector, Motor, TB-3302
17 100240-001 Conduit Locknut, 1/2
18 101156 Driven Pulley, 4 Step
19 155132 Gear Box Ass'y (Before S/N 3100)
20 150427 Gear Box Ass'y (Starting S/N 3100)
21 150233 Gear Case Cover
22 100068-002 Snap Ring
23 100414-003 Bearing
24 100056-001 Key, 3/16 x 3/16 x 3/4 for driven gear only
100056-015 Key 3/16 x 3/16 x 1-7/8 use for pulley shaft
25 101187 Pulley Shaft & pinion use key part# 100056-015 with this
26 100404-002 Bearing
27 M-013 Gear Case
28 100068-001 Snap Ring
29 100072-001 Expansion Plug
30 101286S Driven Gear use key part# 100056-001 with this
31 100404-001 Bearing
32 101644SERV Drive Shaft
33 101645-FP Drive Pinion w/Roll Pin
34 100053-005 Roll Pin, 3/16 x 1
35 100008-086 Cap Screw, HH, 1/4-20 x 2
36 100008-061 Cap Screw, HH, 1/4-20 x 1-1/2
37 100318-005 Lube Mobilgrease XHP220
38 100004-017 Cap Screw, HH, 5/16-18 x 7/8
39 150416 Spacer
40 150426 Drive Shaft
41 100069-003 Snap Ring
42 100097-003 Shim (as req'd)
43 101643 Drive Shaft & Pinion Assembly (includes items 32-34)
44 100023-005 Lock Nut, Nylon, 5/8-11
45 150424 Gear Case
46 150425 Gear Case Cover
47 100056-015 Key, 3/16 x 3/16 x 1-7/8
30