Step 10, Illustration 10a, Illustration 10b – Catskill Craftsmen 15445 User Manual
Page 10
Advertising
A. Upright unit and attach an “L” Bracket to the top inside of each leg using 5/8“ #7 Phillips head
screws. The screws go through the round hole in the “L” Bracket.
b. Attach the drop leaf supports and hinges to the Table Top and Drop Leaf using 5/8” #8 screws.
STEP 10
Top Assembly
Illustration 7-A
Make sure the round hole is
used to attach the L-Bracket
to the Leg.
Brace and glide removed in illustration 10A
to show placement of “L” Bracket
Illustration 10A
A. Mark a cross over the pilot holes as illustrated in Illustration 10B. This helps to line up the pilot
holes when placing the top on the cabinet.
Illustration 10B
Advertising